0755-23179541 
sales@oyii.net
OYI B Type Fast Connector
Optic Fiber Fast Connector
OYI B Type Fast Connector
Mechanical connectors make fiber terminations quick, easy, and reliable. These fiber optic connectors offer terminations without any hassle and require no epoxy, no polishing, no splicing, and no heating. They can achieve similar excellent transmission parameters as standard polishing and splicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cable in FTTH projects, directly at the end-user site.
Product Features
Easy to operate, the connector can be directly used in ONU. With a fastening strength of more than 5 kg, it is widely used in FTTH projects for network revolution. It also reduces the use of sockets and adapters, saving project costs.
With an 86mm standard socket and adapter, the connector makes a connection between the drop cable and patch cord. The 86mm standard socket provides complete protection with its unique design.
Technical Specifications
| Items | OYI B Type |
| Cable Scope | 2.0×3.0 mm/2.0×5.0mm Drop Cable, |
| 2.0mm Indoor Round Cable | |
| Size | 49.5*7*6mm |
| Fiber Diameter | 125μm ( 652& 657) |
| Coating Diameter | 250μm |
| Mode | SM |
| Operation Time | about 15s (exclude fiber presetting) |
| Insertion Loss | ≤0.3dB (1310nm & 1550nm) |
| Return Loss | ≤-50dB for UPC, ≤-55dB for APC |
| Success Rate | ＞98% |
| Reusable Times | ＞10 times |
| Tighten Strength Of Naked Fiber | ＞5N |
| Tensile Strength | ＞50N |
| Temperature | -40~+85℃ |
| On-line Tensile Strength Test (20N) | △ IL≤0.3dB |
| Mechanical Durability (500 times) | △ IL≤0.3dB |
| Drop Test (4m concrete floor , once each direction, three times total) | △ IL≤0.3dB |
Applications
FTTx solution and outdoor fiber terminal end.
Fiber optic distribution frame, patch panel, ONU.
In the box, cabinet, such as wiring into the box.
Maintenance or emergency restoration of fiber network.
The construction of the fiber end user access and maintenance.
Optical fiber access for mobile base stations.
Applicable to connection with field mountable indoor cable, pigtail, patch cord transformation of patch cord in.
Packaging Information
Quantity: 100pcs/Inner Box, 1200pcs/Outer Carton.
Carton Size: 49*36.5*25cm.
N.Weight: 6.62kg/Outer Carton.
G.Weight: 7.52kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-NOO2 Floor-Mounted Cabinet
-
OPGW Optical Ground Wire
Layered stranded OPGW is one or more fiber-optic stainless steel units and aluminum-clad steel wires together, with stranded technology to fix the cable, aluminum-clad steel wire stranded layers of more than two layers, the product features can accommodate multiple fiber-optic unit tubes, fiber core capacity is large. At the same time, the cable diameter is relatively large, and the electrical and mechanical properties are better. The product features light weight, small cable diameter and easy installation.
-
OYI-FOSC-M20
The OYI-FOSC-M20 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
Mini Steel Tube Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals. It is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
-
OYI F Type Fast Connector
Our fiber optic fast connector, the OYI F type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation.
-
Fanout Multi-core (4~48F) 2.0mm Connectors Patc...
OYI fiber optic fanout patch cord, also known as a fiber optic jumper, is composed of a fiber optic cable terminated with different connectors on each end. Fiber optic patch cables are used in two major application areas: computer workstations to outlets and patch panels or optical cross-connect distribution centers. OYI provides various types of fiber optic patch cables, including single-mode, multi-mode, multi-core, armored patch cables, as well as fiber optic pigtails and other special patch cables. For most patch cables, connectors such as SC, ST, FC, LC, MU, MTRJ, and E2000 (APC/UPC polish) are all available.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.