0755-23179541 
sales@oyii.net
Outdoor Self-supporting Bow-type drop cable GJYXCH/GJYXFCH
GJYXCH/GJYXFCH
Outdoor Self-supporting Bow-type drop cable GJYXCH/GJYXFCH
Product Video
Product Features
Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission properties.
Two parallel FRP or parallel metallic strength members ensure good performance of crush resistance to protect the fiber.
Low smoke, zero halogen, and flame-retardant sheath.
Single structure, lightweight, and high practicality.
Novel flute design, easy to strip and splice, simplifies installation and maintenance.
Single steel wire, as an additional strength member, ensures good performance of tensile strength.
Optical Characteristics
| Fiber Type | Attenuation | 1310nm MFD
(Mode Field Diameter) |
Cable Cut-off Wavelength λcc(nm) | |
| @1310nm(dB/KM) | @1550nm(dB/KM) | |||
| G652D | ≤0.36 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G657A1 | ≤0.36 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G657A2 | ≤0.36 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G655 | ≤0.4 | ≤0.23 | (8.0-11)±0.7 | ≤1450 |
Technical Parameters
| Cable Code | Fiber Count | Cable Size (mm) |
Cable Weight (kg/km) |
Tensile Strength (N) | Crush Resistance
(N/100mm) |
Bending Radius（mm） | Drum Size 1km/drum |
Drum Size 2km/drum |
|||
| Long Term | Short Term | Long Term | Short Term | Dynamic | Static | ||||||
| GJYXCH/GJYXFCH | 1~4 | (2.0±0.1)x(5.2±0.1) | 19 | 300 | 600 | 1000 | 2200 | 30 | 15 | 32*32*30 | 40*40*32 |
Application
Outoor wiring system.
FTTH, terminal system.
Indoor shaft, building wiring.
Laying Method
Self-supporting
Operating Temperature
| Temperature Range | ||
| Transportation | Installation | Operation |
| -20℃~+60℃ | -5℃~+50℃ | -20℃~+60℃ |
Standard
YD/T 1997.1-2014, IEC 60794
Packing And Mark
OYI cables are coiled on bakelite, wooden, or ironwood drums. During transportation, the right tools should be used to avoid damaging the package and to handle them with ease. Cables should be protected from moisture, kept away from high temperatures and fire sparks, protected from over-bending and crushing, and protected from mechanical stress and damage. It is not allowed to have two lengths of cable in one drum, and both ends should be sealed. The two ends should be packed inside the drum, and a reserve length of cable not less than 3 meters should be provided.
| Packing length： | 1km/roll, 2km/roll. Other lengths available according to clients' requests. | |
| Inner packing: | wooden reel, plastic reel. | |
| Outer packing: | Carton box, pull box, pallet. | |
| Other packing available according to clients' requests. | ||
The color of cable markings is white. The printing shall be carried out at intervals of 1 meter on the outer sheath of the cable. The legend for the outer sheath marking can be changed according to the user's requests.
Test report and certification provided.
-
Air Blowing Mini Optical Fibre Cable
The optical fiber is placed inside a loose tube made of high-modulus hydrolyzable material. The tube is then filled with thixotropic, water-repellent fiber paste to form a loose tube of optical fiber. A plurality of fiber optic loose tubes, arranged according to color order requirements and possibly including filler parts, are formed around the central non-metallic reinforcement core to create the cable core via SZ stranding. The gap in the cable core is filled with dry, water-retaining material to block water. A layer of polyethylene (PE) sheath is then extruded.
The optical cable is laid by air blowing microtube. First, the air blowing microtube is laid in the outer protection tube, and then the micro cable is laid in the intake air blowing microtube by air blowing. This laying method has a high fiber density, which greatly improves the utilization rate of the pipeline. It is also easy to expand the pipeline capacity and diverge the optical cable. -
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
OYI-OCC-B Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.
-
OYI-ODF-SR-Series Type
The OYI-ODF-SR-Series type optical fiber cable terminal panel is used for cable terminal connection and can also be used as a distribution box. It has a 19″ standard structure and is rack-mounted with a drawer structure design. It allows for flexible pulling and is convenient to operate. It is suitable for SC, LC, ST, FC, E2000 adapters, and more.
The rack mounted optical cable terminal box is a device that terminates between the optical cables and the optical communication equipment. It has the functions of splicing, termination, storing, and patching of optical cables. The SR-series sliding rail enclosure allows for easy access to fiber management and splicing. It is a versatile solution available in multiple sizes (1U/2U/3U/4U) and styles for building backbones, data centers, and enterprise applications.
-
Male to Female Type SC Attenuator
OYI SC male-female attenuator plug type fixed attenuator family offers high performance of various fixed attenuation for industrial standard connections. It has a wide attenuation range, extremely low return loss, is polarization insensitive, and has excellent repeatability. With our highly integrated design and manufacturing capability, the attenuation of male-female type SC attenuator can also be customized to help our customers find better opportunities. Our attenuator complies with industry green initiatives, such as ROHS.
-
OYI-ATB08A Desktop Box
OYI-ATB08A 8-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.