0755-23179541 
sales@oyii.net
OYI-ODF-R-Series Type
Optic Fiber Terminal/Distribution Panel
OYI-ODF-R-Series Type
Product Features
Rack-mount, 19-inch (483mm), flexible mounting, electrolysis plate frame, electrostatic spraying throughout.
Adopt face cable entry, full-faced operation.
Safe and flexible, mount against wall or back-to-back.
Modular structure, easy to adjust fusion and distribution units.
Available for zonary and non-zonary cables.
Suitable for inserting installation of SC, FC, and ST adaptors.
Adaptor and module are observed at a 30° angle, ensuring the bend radius of the patch cord and avoiding laser burning eyes.
Reliable stripping, protection, fixing, and grounding devices.
Ensure fiber and cable bend radius is greater than 40mm everywhere.
Accomplishing scientific arrangement for patch cords with Fiber Storage Units.
According to simple adjustment among the units, the cable can be led in from the top or bottom, with clear marks for fiber distribution.
Door lock of a special structure, quick opening and closing.
Slide rail structure with limiting and positioning unit, convenient module removal and fixation.
Technical Specifications
1.Standard: Compliance with YD/T 778.
2.Inflammability: Compliance with GB5169.7 Experiment A.
3.Environmental Conditions.
(1) Operation temperature: -5°C ~+40°C.
(2) Storage and transportation temperature: -25°C ~+55°C.
(3) Relative humidity: ≤85% (+30°C).
(4) Atmospheric pressure: 70 Kpa ~ 106 Kpa.
|
Mode Type |
Size (mm) |
Max Capacity |
Outer Carton Size (mm) |
Gross Weight (kg) |
Quantity In Carton Pcs |
|
OYI-ODF-RA12 |
430*280*1U |
12 SC |
440*306*225 |
14.6 |
5 |
|
OYI-ODF-RA24 |
430*280*2U |
24 SC |
440*306*380 |
16.5 |
4 |
|
OYI-ODF-RA36 |
430*280*2U |
36 SC |
440*306*380 |
17 |
4 |
|
OYI-ODF-RA48 |
430*280*3U |
48 SC |
440*306*410 |
15 |
3 |
|
OYI-ODF-RA72 |
430*280*4U |
72 SC |
440*306*180 |
8.15 |
1 |
|
OYI-ODF-RA96 |
430*280*5U |
96 SC |
440*306*225 |
10.5 |
1 |
|
OYI-ODF-RA144 |
430*280*7U |
144 SC |
440*306*312 |
15 |
1 |
|
OYI-ODF-RB12 |
430*230*1U |
12 SC |
440*306*225 |
13 |
5 |
|
OYI-ODF-RB24 |
430*230*2U |
24 SC |
440*306*380 |
15.2 |
4 |
|
OYI-ODF-RB48 |
430*230*3U |
48 SC |
440*306*410 |
5.8 |
1 |
|
OYI-ODF-RB72 |
430*230*4U |
72 SC |
440*306*180 |
7.8 |
1 |
Applications
Data communications networks.
Storage area network.
Fiber channel.
FTTx system wide area network.
Test instruments.
LAN/WAN/CATV networks.
Widely used in FTTH access network.
Telecommunications subscriber loop.
Packaging Information
Quantity: 4pcs/Outer box.
Carton Size: 52*43.5*37cm.
N.Weight: 18.2kg/Outer Carton.
G.Weight: 19.2kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
8 Cores Type OYI-FAT08B Terminal Box
The 12-core OYI-FAT08B optical terminal box performs in accordance with the industry-standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT08B optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optic lines are very clear, making it convenient to operate and maintain. There are 2 cable holes under the box that can accommodate 2 outdoor optical cables for direct or different junctions, and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with a capacity of 1*8 Cassette PLC splitter to accommodate the expansion of the box’s usage. -
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House.
According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC.
Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.
-
10/100Base-TX Ethernet Port to 100Base-FX Fiber...
MC0101G fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-TX or 1000Base-TX Ethernet signals and 1000Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.
MC0101G fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 550m or a maximum single mode fiber optic cable distance of 120km providing a simple solution for connecting 10/100Base-TX Ethernet networks to remote locations using SC/ST/FC/LC terminated single mode/multimode fiber, while delivering solid network performance and scalability.
Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features auto. switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode speed, full and half duplex. -
Loose Tube Non-metallic & Non-armored Fibe...
The structure of the GYFXTY optical cable is such that a 250μm optical fiber is enclosed in a loose tube made of high modulus material. The loose tube is filled with waterproof compound and water-blocking material is added to ensure longitudinal water-blocking of the cable. Two glass fiber reinforced plastics (FRP) are placed on both sides, and finally, the cable is covered with a polyethylene (PE) sheath through extrusion.
-
ADSS Suspension Clamp Type B
The ADSS suspension unit is made of high tensile galvanized steel wire materials, which have higher corrosion resistance capability, thus extending the lifetime usage. The gentle rubber clamp pieces improve self-damping and reduce abrasion.
-
Drop Cable Anchoring Clamp S-Type
Drop wire tension clamp s-type, also called FTTH drop s-clamp, is developed to tension and support flat or round fiber optic cable on intermediate routes or last mile connections during outdoor overhead FTTH deployment. It is made of UV proof plastic and a stainless steel wire loop processed by injection molding technology.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.