0755-23179541 
sales@oyii.net
OYI-ATB04C Desktop Box
Optic Fiber FTTH Box 4 Cores Type
OYI-ATB04C Desktop Box
Product Features
1.IP-55 Protection level.
2.Integrated with cable termination and management rods.
3.Manage fibers in a reasonable fiber radius(30mm) condition.
4.High quality industrial anti-aging ABS plastic material.
5.Suitable for the wall mounted installation.
6.Suitable for FTTH indoor application.
7.4 port cable entrance for drop cable or patch cable.
8.Fiber adapter can be installed in the rosette for patching.
9.UL94-V0 fire-retardant material can be customized as option.
10.Temperature: -40 ℃ to +85 ℃.
11.Humidity: ≤ 95% (+40 ℃).
12.Atmospheric pressure: 70KPa to 108KPa.
13.Box structure: The 4-port desktop box consists mainly of the cover and the bottom box. The box structure is shown in the figure.
Specifications
|
Item No. |
Description |
Weight (g) |
Size (mm) |
|
OYI-ATB04A |
For 4pcs SC Simplex Adapter |
105 |
110*150*30 |
|
Material |
ABS/ABS+PC |
||
|
Colour |
White or customer’s request |
||
|
Waterproof |
IP55 |
||
Applications
1.FTTX access system terminal link.
2.Widely used in FTTH access network.
3.Telecommunication networks.
4.CATV networks.
5.Data communications networks.
6.Local area networks.
The Installation Instruction Of The Box
1. Wall installation
1.1 According to the bottom box mounting hole distance on the wall to play two mounting holes, and knock into the plastic expansion sleeve.
1.2 Fix the box to the wall with M8 × 40 screws.
1.3 Check the installation of the box, qualified to cover the lid.
1.4 According to the construction requirements of the introduction of outdoor cable and FTTH drop cable.
2. Open the box
2.1 Hands were holding the cover and the bottom box, a little hard to break out to open the box.
Packaging Information
1. Quantity: 1pcs/ inner box , 100pcs/Outer box.
2.Carton Size: 59*32*33cm.
3.N.Weight: 13kg/Outer Carton.
4.G.Weight: 13.5kg/Outer Carton.
5.OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
Micro Fiber Indoor Cable GJYPFV(GJYPFH)
The structure of indoor optical FTTH cable is as follows: in the center is the optical communication unit.Two parallel Fiber Reinforced (FRP/Steel wire) are placed on the two sides. Then, the cable is completed with a black or colored Lsoh Low Smoke Zero Halogen (LSZH/PVC) sheath.
-
Bare Fiber Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, and is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
-
ADSS Suspension Clamp Type A
The ADSS suspension unit is made of high tensile galvanized steel wire materials, which have higher corrosion resistance capability and can extend the lifetime usage. The gentle rubber clamp pieces improve self-damping and reduce abrasion.
-
OYI F Type Fast Connector
Our fiber optic fast connector, the OYI F type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation.
-
8 Cores Type OYI-FAT08B Terminal Box
The 12-core OYI-FAT08B optical terminal box performs in accordance with the industry-standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT08B optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optic lines are very clear, making it convenient to operate and maintain. There are 2 cable holes under the box that can accommodate 2 outdoor optical cables for direct or different junctions, and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with a capacity of 1*8 Cassette PLC splitter to accommodate the expansion of the box’s usage. -
Loose Tube Corrugated Steel/Aluminum Tape Flame...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound, and a steel wire or FRP is located in the center of the core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. The PSP is longitudinally applied over the cable core, which is filled with filling compound to protect it from water ingress. Finally, the cable is completed with a PE (LSZH) sheath to provide additional protection.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
