0755-23179541 
sales@oyii.net
Loose Tube Non-metallic Heavy Type Rodent Protected Cable
GYFTY63
Loose Tube Non-metallic Heavy Type Rodent Protected Cable
Product Features
The design of non-metallic reinforcement and layered structure ensures that the optical cable has good mechanical and temperature characteristics.
Resistant to high and low temperature cycles, resulting in anti-aging and a longer lifespan.
High strength non-metallic reinforcement and glass yarn bear axial loads.
Filling the cable core with waterproof ointment can effectively waterproof.
Effectively preventing damage to optical cables by rodents.
Optical Characteristics
|
Fiber Type |
Attenuation |
1310nm MFD (Mode Field Diameter) |
Cable Cut-off Wavelength λcc(nm) |
|
|
@1310nm(dB/KM) |
@1550nm(dB/KM) |
|||
|
G652D |
≤0.36 |
≤0.22 |
9.2±0.4 |
≤1260 |
|
G657A1 |
≤0.36 |
≤0.22 |
9.2±0.4 |
≤1260 |
|
G657A2 |
≤0.36 |
≤0.22 |
9.2±0.4 |
≤1260 |
|
G655 |
≤0.4 |
≤0.23 |
(8.0-11)±0.7 |
≤1450 |
|
50/125 |
≤3.5 @850nm |
≤1.5 @1300nm |
/ |
/ |
|
62.5/125 |
≤3.5 @850nm |
≤1.5 @1300nm |
/ |
/ |
Technical Parameters
| Fiber Count | Cable Diameter (mm) ±0.5 |
Cable Weight (kg/km) |
Tensile Strength (N) | Crush Resistance (N/100mm) | Bending Radius (mm) | |||
| Long Term | Short Term | Long Term | Short Term | Static | Dynamic | |||
| 4-36 | 11.4 | 107 | 1000 | 3000 | 1000 | 3000 | 12.5D | 25D |
| 48-72 | 12.1 | 124 | 1000 | 3000 | 1000 | 3000 | 12.5D | 25D |
| 84 | 12.8 | 142 | 1000 | 3000 | 1000 | 3000 | 12.5D | 25D |
| 96 | 13.3 | 152 | 1000 | 3000 | 1000 | 3000 | 12.5D | 25D |
| 108 | 14 | 167 | 1000 | 3000 | 1000 | 3000 | 12.5D | 25D |
| 120 | 14.6 | 182 | 1000 | 3000 | 1000 | 3000 | 12.5D | 25D |
| 132 | 15.2 | 197 | 1000 | 3000 | 1000 | 3000 | 12.5D | 25D |
| 144 | 16 | 216 | 1200 | 3500 | 1200 | 3500 | 12.5D | 25D |
Application
Long distance and inter office communication in the communication industry.
Laying Method
Non self-supporting overhead and pipeline.
Operating Temperature
| Temperature Range | ||
| Transportation | Installation | Operation |
| -40℃~+70℃ | -5℃~+50℃ | -40℃~+70℃ |
Standard
YD/T 901
Packing And Mark
OYI cables are coiled on bakelite, wooden, or ironwood drums. During transportation, the right tools should be used to avoid damaging the package and to handle them with ease. Cables should be protected from moisture, kept away from high temperatures and fire sparks, protected from over-bending and crushing, and protected from mechanical stress and damage. It is not allowed to have two lengths of cable in one drum, and both ends should be sealed. The two ends should be packed inside the drum, and a reserve length of cable not less than 3 meters should be provided.
The color of cable markings is white. The printing shall be carried out at intervals of 1 meter on the outer sheath of the cable. The legend for the outer sheath marking can be changed according to the user's requests.
Test report and certification provided.
-
GJYFKH
-
OYI-FOSC-D111
OYI-FOSC-D111 is an oval dome type fiber optic splice closure that support fiber splicing and protection. It is waterproof and dust proof and suitable for outdoor aerial hanged, pole mounted, wall mounted, duct or buried application.
-
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
-
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath.
-
ONU 1GE
The 1GE is a single port XPON fiber optic modem, which is designed to meet the FTTH ultra-wide band access requirements of home and SOHO users. It supports NAT / firewall and other functions. It is based on stable and mature GPON technology with high cost-performance and layer 2 Ethernet switch technology. It is reliable and easy to maintain, guarantees QoS, and fully conforms to ITU-T g.984 XPON standard.
-
OYI A Type Fast Connector
Our fiber optic fast connector, the OYI A type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation, and the structure of the crimping position is a unique design.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
