0755-23179541 
sales@oyii.net
Indoor Bow-type drop cable
GJXH/GJXFH
Indoor Bow-type drop cable
Product Features
Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission properties.
Two parallel FRP or parallel metallic strength members ensure good performance of crush resistance to protect the fiber.
Simple structure, lightweight, and high practicability.
Novel flute design, easily stripped and spliced, simplifies installation and maintenance.
Low smoke, zero halogen, and flame-retardant sheath.
Optical Characteristics
| Fiber Type | Attenuation | 1310nm MFD
(Mode Field Diameter) |
Cable Cut-off Wavelength λcc(nm) | |
| @1310nm(dB/KM) | @1550nm(dB/KM) | |||
| G652D | ≤0.36 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G657A1 | ≤0.36 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G657A2 | ≤0.36 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G655 | ≤0.4 | ≤0.23 | (8.0-11)±0.7 | ≤1450 |
Technical Parameters
| Cable Code |
Fiber Count |
Cable Size (mm) |
Cable Weight (kg/km) |
Tensile Strength (N) | Crush Resistance
(N/100mm) |
Bending Radius （mm） | Drum Size 1km/drum |
Drum Size 2km/drum |
|||
| Long Term | Short Term | Long Term | Short Term | Dynamic | Static | ||||||
| GJXFH | 1~4 | (2.0±0.1)x(3.0±0.1) | 8 | 40 | 80 | 500 | 1000 | 30 | 15 | 29*29*28cm | 33*33*27cm |
Application
Indoor wiring system.
FTTH, terminal system.
Indoor shaft, building wiring.
Laying Method
Self-supporting
Operating Temperature
| Temperature Range | ||
| Transportation | Installation | Operation |
| -20℃~+60℃ | -5℃~+50℃ | -20℃~+60℃ |
Standard
YD/T 1997.1-2014, IEC 60794
Packing And Mark
OYI cables are coiled on bakelite, wooden, or ironwood drums. During transportation, the right tools should be used to avoid damaging the package and to handle them with ease. Cables should be protected from moisture, kept away from high temperatures and fire sparks, protected from over-bending and crushing, and protected from mechanical stress and damage. It is not allowed to have two lengths of cable in one drum, and both ends should be sealed. The two ends should be packed inside the drum, and a reserve length of cable not less than 3 meters should be provided.
| Packing length： | 1km/roll, 2km/roll. Other lengths available according to clients' requests. | |
| Inner packing: | wooden reel, plastic reel. | |
| Outer packing: | Carton box, pull box, pallet. | |
| Other packing available according to clients' requests. | ||
The color of cable markings is white. The printing shall be carried out at intervals of 1 meter on the outer sheath of the cable. The legend for the outer sheath marking can be changed according to the user's requests.
Test report and certification provided.
-
Bundle Tube Type all Dielectric ASU Self-Suppor...
The structure of the optical cable is designed to connect 250 μm optical fibers. The fibers are inserted into a loose tube made of high modulus material, which is then filled with waterproof compound. The loose tube and FRP are twisted together using SZ. Water blocking yarn is added to the cable core to prevent water seepage, and then a polyethylene (PE) sheath is extruded to form the cable. A stripping rope can be used to tear open the optical cable sheath.
-
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
Central Loose Tube Stranded Figure 8 Self-suppo...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. Then, the core is wrapped with swelling tape longitudinally. After part of the cable, accompanied by the stranded wires as the supporting part, is completed, it is covered with a PE sheath to form a figure-8 structure.
-
8 Cores Type OYI-FAT08B Terminal Box
The 12-core OYI-FAT08B optical terminal box performs in accordance with the industry-standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT08B optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optic lines are very clear, making it convenient to operate and maintain. There are 2 cable holes under the box that can accommodate 2 outdoor optical cables for direct or different junctions, and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with a capacity of 1*8 Cassette PLC splitter to accommodate the expansion of the box’s usage. -
OPGW Optical Ground Wire
The central tube OPGW is made of stainless steel (aluminum pipe) fiber unit in the center and aluminum clad steel wire stranding process in the outer layer. The product is suitable for the operation of single tube optical fiber unit.
-
8 Cores Type OYI-FAT08E Terminal Box
The 8-core OYI-FAT08E optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT08E optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. It can accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 8 cores capacity specifications to meet the expansion needs of the box.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.