0755-23179541
sales@oyii.net
SFP+ 80km transceiver
10Gb/s BIDl 1550/1490nm
SFP+ 80km transceiver
Nkọwa ngwaahịa
PPB-5496-80B bụ ọkụ pluggable 3.3V obere-Form-Factor transceiver modul. Emebere ya nke ọma maka ngwa nzikọrịta ozi dị elu nke chọrọ ọnụego ruru 11.1Gbps, emebere ya ka ọ dabara na SFF-8472 na SFP+ MSA. Data modul ahụ jikọtara ruo 80km na 9/125um fiber mode single mode.
Njirimara ngwaahịa
1. Ruo 11.1Gbps Data njikọ.
2. Ruo 80km nnyefe na SMF.
3. Mgbasa ike <1.5W.
4. 1490nm DFB laser na APD nnata maka FYPPB-4596-80B.
1550nm DFB laser na APD nnata maka FYPPB-5496-80B
5. 6.2-waya interface na integrated Digital Diagnostic nlekota oru.
Ngwa
1.10GBASE-BX.
2.10GBASE-LR/LW.
Ọkọlọtọ
1. Dabara na SFF-8472.
2.Nkwenye na SFF-8431.
3. Dabara na 802.3ae 10GBASE-LR/LW.
4.RoHS kwadoro.
Nkọwa Pin
| Ntụtụ | Akara | Aha/Nkọwa | IHE |
| 1 | VEET | Ground Transmitter (Nke a na-ahụkarị na ala nnata) | 1 |
| 2 | TFAULT | Mmejọ nnyefe. | 2 |
| 3 | TDIS | Gbanyụọ nnyefe. Agbanyụrụ mmepụta laser n'elu ma ọ bụ mepere emepe. | 3 |
| 4 | MOD_DEF (2) | Nkọwa Module 2. Data akara maka Oghere Usoro NJ. | 4 |
| 5 | MOD_DEF (1) | Nkọwa Module 1. Ahịrị elekere maka Oghere Usoro NJ. | 4 |
| 6 | MOD_DEF (0) | Nkọwa Module 0. Gburugburu n'ime modul. | 4 |
| 7 | Họrọ Họrọ | Enweghị njikọ achọrọ | 5 |
| 8 | LOS | Ọnwụ nke akara ngosi. Logic 0 na-egosi ọrụ nkịtị. | 6 |
| 9 | VEER | Ala nnata (Nke a na-ahụkarị na Ground Transmitter) | 1 |
| 10 | VEER | Ala nnata (Nke a na-ahụkarị na Ground Transmitter) | 1 |
| 11 | VEER | Ala nnata (Nke a na-ahụkarị na Ground Transmitter) | 1 |
| 12 | RD- | Ndị nnata tụgharịrị DATA. AC jikọtara |
|
| 13 | RD+ | Ndị nnata na-abụghị DATA apụọ. AC jikọtara |
|
| 14 | VEER | Ala nnata (Nke a na-ahụkarị na Ground Transmitter) | 1 |
| 15 | VCCR | Nkwanye ike nnata |
|
| 16 | VCCT | Nnyefe Ike |
|
| 17 | VEET | Ground Transmitter (Nke a na-ahụkarị na ala nnata) | 1 |
| 18 | TD+ | Mbufe DATA anaghị atụgharị n'ime AC jikọtara. |
|
| 19 | TD- | Mbugharị atụgharịrị DATA n'ime AC Ejikọtara. |
|
| 20 | VEET | Ground Transmitter (Nke a na-ahụkarị na ala nnata) | 1 |
ndetu:
1.Circuit ala bụ internally dịpụrụ adịpụ na chassis ala.
2.TFAULT bụ ihe na-emepe emepe / mmepụta ihe, nke a ga-ebuli na 4.7k - 10k Ohms resistor na bọọdụ nnabata ma ọ bụrụ na ezubere iji ya. Mbupụ voltaji kwesịrị ịdị n'etiti 2.0V ka Vcc + 0.3VA mmepụta dị elu na-egosi mmejọ nke na-ebufe site na ma ọ bụ TX bias current ma ọ bụ ikike mmepụta TX gafere oke oti mkpu. Mpụta dị ala na-egosi ọrụ nkịtị. N'ọnọdụ dị ala, a na-adọta mmepụta na <0.8V.
3.Laser mmepụta nwere nkwarụ na TDIS>2.0V ma ọ bụ meghere, nyeere na TDIS <0.8V.
4.Ekwesịrị ịdọrọ ya na 4.7kΩ- 10kΩ host osisi na voltaji n'etiti 2.0V na 3.6V. MOD_ABS wepụrụ ahịrị dị ala iji gosi na etinyere modul.
5.Internally wedara kwa SFF-8431 Mkpu 4.1.
6.LOS bụ mmepụta onye nchịkọta na-emeghe. Ekwesịrị ịdọrọ ya na 4.7kΩ - 10kΩ na bọọdụ nnabata na voltaji n'etiti 2.0V na 3.6V. Logic 0 na-egosi ọrụ nkịtị; mgbagha 1 na-egosi ọnwụ nke mgbaama.
Ihe osise pin
Oke kacha oke
| Oke | Akara | Min. | Ụdị. | Oke. | Nkeji | Rịba ama |
| Okpomọkụ nchekwa | Ts | -40 |
| 85 | ºC |
|
| Iru mmiri dị n'etiti | RH | 5 |
| 95 | % |
|
| Voltaji na-enye ike | VCC | -0.3 |
| 4 | V |
|
| Voltaji ntinye akara |
| Vcc-0.3 |
| Vcc + 0.3 | V |
Ọnọdụ ọrụ akwadoro
| Oke | Akara | Min. | Ụdị. | Oke. | Nkeji | Rịba ama |
| Ọnọdụ okpomọkụ na-arụ ọrụ | Tcase | 0 |
| 70 | ºC | Enweghị ikuku ikuku |
| Voltaji na-enye ike | VCC | 3.13 | 3.3 | 3.47 | V |
|
| Nkwanye ike ugbu a | ICC |
|
| 520 | mA |
|
| Ọnụego data |
|
| 10.3125 |
| Gbps | Ọnụego TX/RX |
| Ogologo nnyefe |
|
|
| 80 | KM |
|
| Fiber jikọtara ọnụ |
|
| Otu mode eriri |
| 9/125 SMF | |
Njirimara ngwa anya
| Oke | Akara | Min. | Ụdị. | Oke. | Nkeji | Rịba ama |
|
| Nyefe |
|
|
| ||
| Nkezi Ike ewepụtara | Pụpụta | 0 | - | 5 | dBm |
|
| Nkezi Ike ewepụtara (Laser Gbanyụọ) | Poff | - | - | -30 | dBm | Rịba ama (1) |
| Ogologo Ogologo Ogologo etiti | λC | 1540 | 1550 | 1560 | nm | FYPPB-5496-80B |
| Oke njigide ọnọdụ | SMSR | 30 | - | - | dB |
|
| Bandwit Spectrum (-20dB) | σ | - | - | 1 | nm |
|
| Oke mkpochapụ | ER | 3.5 |
| - | dB | Rịba ama (2) |
| Ihe nkpuchi anya pụta | Dabara na IEEE 802.3ae |
|
| Rịba ama (2) | ||
|
| Onye nnata |
|
|
| ||
| Ntinye ngwa anya wavelength | λIN | 1480 | 1490 | 1500 | nm | FYPPB-5496-80B |
| Mmetụta nke nnata | Psen | - | - | -23 | dBm | Rịba ama (3) |
| Ntinye ike saturation (bufee) | PSAT | -8 | - | - | dBm | Rịba ama (3) |
| LOS -Ngosipụta ike | PA | -38 | - | - | dBm |
|
| LOS - Ike Deassert | PD | - | - | -24 | dBm |
|
| LOS - Hysteresis | PHys | 0.5 | - | 5 | dB | |
Mara:
1.The ngwa anya ike na ulo oru n'ime SMF
2. Ejiri ụkpụrụ ule RPBS 2^31-1 tụọ @10.3125Gbs
3. Ejiri ụkpụrụ ule RPBS 2^31-1 tụọ @10.3125Gbs BER= <10^-12
Njirimara Interface Eletriki
| Oke | Akara | Min. | Ụdị. | Oke. | Nkeji | Rịba ama |
| Mgbakọta ọkụ ọkụ ugbu a | Icc | - |
| 520 | mA |
|
| Nyefe | ||||||
| Voltaji ntinye data dị iche | VDT | 180 | - | 700 | mVp-p |
|
| Ntinye ahịrị dị iche iche Impedance | RIN | 85 | 100 | 115 | Ohm |
|
| Mmebi nke mbufe-Elu | VFaultH | 2.4 | - | Vcc | V |
|
| Mmepụta mmejọ nke nnyefe-dị ala | VFaultL | -0.3 | - | 0.8 | V |
|
| Nyefee gbanyụọ voltaji- dị elu | VDisH | 2 | - | Vcc + 0.3 | V |
|
| Nnyefe gbanyụọ voltaji- dị ala | VDisL | -0.3 | - | 0.8 | V |
|
| Onye nnata | ||||||
| Voltage mmepụta data dị iche | VDR | 300 | - | 850 | mVp-p |
|
| Mpụpụta ahịrị dị iche | ROUT | 80 | 100 | 120 | Ohm |
|
| Onye nnata LOS Bulie Resistor | RLOS | 4.7 | - | 10 | KOhm | |
| Mbupute data bilie/oge ọdịda | tr/tf |
| - | 38 | ps |
|
| LOS Mpụta Voltaji-Elu | VLOSH | 2 | - | Vcc | V |
|
| Voltaji mmepụta LOS-dị ala | VLOSL | -0.3 | - | 0.4 | V | |
Ọrụ Nchọpụta Dijitalụ
PPB-5496-80Btransceiverskwado usoro nzikọrịta ozi serial waya abụọ dịka akọwara na SFP+MSA.
Ọkọlọtọ SFP serial ID na-enye ohere ịnweta ozi njirimara nke na-akọwa ike transceiver, oghere ọkọlọtọ, ndị nrụpụta na ozi ndị ọzọ.
Na mgbakwunye, transceivers OYI's SFP+ na-enye ihe nleba anya nyocha dijitalụ pụrụ iche, nke na-enye ohere ịnweta ngwa ngwa na-arụ ọrụ ozugbo dị ka okpomọkụ transceiver, nhụsianya laser ugbu a, ike anya na-ebufe, nata ike anya na transceiver voltaji ọkọnọ. Ọ na-akọwapụta usoro oti mkpu na ọkọlọtọ ịdọ aka ná ntị ọkaibe, nke na-eme ka ndị ọrụ njedebe mara mgbe otu paramita arụ ọrụ dị na mpụga ụlọ nrụpụta setịpụrụ oke nkịtị.
SFP MSA na-akọwa map ebe nchekwa 256-byte na EEPROM nke a na-enweta n'elu 2-waya serial interface na 8 bit address 1010000X (A0h) .The digital diagnostic monitoring interface na-eji nke 8 bit adreesị 1010001X (A2h), ya mere na mbụ kọwaa Oghere Usoro ID ebe nchekwa na-anọgide na-agbanwe agbanwe map ID.
A na-enyocha ma kọwapụta ozi na-arụ ọrụ na nyocha site na Digital Diagnostics Transceiver Controller (DDTC) n'ime transceiver, nke a na-enweta site na interface serial waya abụọ. Mgbe usoro usoro nrụnye n'ọrụ, akara elekere serial (SCL, Mod Def 1) bụ onye nnabata na-emepụta. Akụkụ dị mma na-emechi data n'ime transceiver SFP n'ime akụkụ ndị ahụ nke E2PROM na-echekwaghị ederede. Ọnụ adịghị mma na-emechi data sitere na transceiver SFP. Ihe mgbama data serial (SDA, Mod Def 2) bụ ntụzịaka maka ịnyefe data nsonazụ. Onye ọbịa na-eji SDA na njikọ ya na SCL akara mmalite na njedebe nke ịgbalite usoro usoro.
A haziri ncheta ndị ahụ dị ka usoro okwu data 8-bit nke enwere ike idozi n'otu n'otu ma ọ bụ n'usoro.
Kwado atụmatụ sekit
Nkọwapụta igwe (Nkeji: mm)
Nrube isi n'usoro
| Njirimara | Ntụaka | Arụmọrụ |
| Ọpụpụ Electrostatic (ESD) | IEC / EN 61000-4-2 | Dakọtara na ụkpụrụ |
| Ntinye aka Electromagnetic (EMI) | FCC Nkebi 15 Klas B EN 55022 Klas B (CISPR 22A) | Dakọtara na ụkpụrụ |
| Nchekwa Anya Laser | FDA 21CFR 1040.10, 1040.11 IEC/EN 60825-1, 2 | Ngwaahịa laser klaasị 1 |
| Nchọpụta akụkụ | IEC / EN 60950 UL | Dakọtara na ụkpụrụ |
| ROHS | 2002/95/EC | Dakọtara na ụkpụrụ |
| EMC | EN61000-3 | Dakọtara na ụkpụrụ |
-
Ụdị usoro OYI-ODF-PLC
PLC splitter bụ ngwa anya ike nkesa dabere na agbakwunyere waveguide nke quartz efere. Ọ nwere njiri mara nke obere nha, ogologo ogologo ogologo na-arụ ọrụ, ntụkwasị obi kwụsiri ike, yana ịdị n'otu dị mma. A na-eji ya n'ọtụtụ ebe na PON, ODN, na FTTX iji jikọọ n'etiti akụrụngwa ọnụ na ụlọ ọrụ etiti iji nweta nkewa mgbaàmà.
Usoro OYI-ODF-PLC 19' rack mount ụdị nwere 1 × 2, 1 × 4, 1 × 8, 1 × 16, 1 × 32, 1 × 64, 2 × 2, 2 × 4, 2 × 8, 2 × 16, 2 × 32, na 2 × 64, nke ahaziri maka ngwa na ahịa dị iche iche. Ọ nwere kọmpat size na nnukwu bandwit. Ngwaahịa niile na-ezute ROHS, GR-1209-CORE-2001, na GR-1221-CORE-1999.
-
Ụdị OYI-OCC-B
Ọnụ nkesa fiber optic bụ akụrụngwa eji dị ka ngwaọrụ njikọ n'ime netwọọdụ nnweta fiber optic maka eriri feeder na eriri nkesa. A na-ekewa eriri fiber optic ozugbo ma ọ bụ kwụsị ma jikwaa ya site na eriri mkpọchi maka nkesa. Site na mmepe nke FTTX, A ga-etinye kabinet cross-connection cabinets n'èzí ma gaa nso na onye ọrụ njedebe.
-
16 Cores Ụdị OYI-FAT16B njedebe igbe
16-isi OYI-FAT16Bngwa anya ọnụ igbena-arụ ọrụ dịka ụkpụrụ ụlọ ọrụ chọrọ nke YD/T2150-2010. A na-ejikarị ya eme ihe naSistemụ nnweta FTTXnjikọ ọnụ. A na-eme igbe ahụ nke PC dị elu, ABS plastic alloy injection molding, nke na-enye ezigbo akara na iguzogide ịka nká. Tụkwasị na nke ahụ, enwere ike kpọgidere ya na mgbidi n'èzí ma ọ bụn'ime ụlọ maka echichina iji.
Igbe ọnụ anya OYI-FAT16B nwere ime ime nke nwere nhazi otu oyi akwa, kewara na mpaghara ahịrị nkesa, ntinye eriri n'èzí, tray splicing fiber, na FTTH.dobe eriri anyanchekwa. Ahịrị anya eriri fiber doro anya nke ọma, na-eme ka ọ dị mfe iji rụọ ọrụ na idobe ya. Enwere oghere USB 2 n'okpuru igbe nke nwere ike ịnabata 2n'èzí ngwa anya cablesmaka njikọ kpọmkwem ma ọ bụ dị iche iche, ọ nwekwara ike ịnweta eriri anya 16 FTTH maka njikọ njedebe. The fiber splicing tray na-eji ụdị ntụgharị ma nwee ike hazie ya na nkọwa ikike cores iri na isii iji nabata mkpa mgbasawanye igbe ahụ. -
OYI H Ụdị Njikọ Ọsọ
Njikọ ngwa ngwa fiber optic anyị, ụdị OYI H, emebere ya maka FTTH (Fiber to The Home), FTTX (Fiber to the X). Ọ bụ ọgbọ ọhụrụ nke eriri eriri eriri eji na mgbakọ na-enye oghere na-emeghe na ụdị precast, na-ezute nkọwa ngwa anya na n'ibu nke njikọ eriri anya ọkọlọtọ. Emebere ya maka ịdị mma dị elu na arụmọrụ dị elu n'oge ntinye.
Hot-agbaze ngwa ngwa mgbakọ njikọ bụ kpọmkwem na a egweri nke ferrule njikọ ozugbo na falt cable 2 * 3.0MM / 2 * 5.0MM / 2 * 1.6MM, gburugburu cable 3.0MM,2.0MM,0.9MM, na-eji a fusion splice, splicing ebe n'ime njikọ ọdụ ọdụ, weld adịghị mkpa maka nchebe ọzọ. Ọ nwere ike melite arụmọrụ ngwa anya nke njikọ. -
Ụdị FC
Fiber optic nkwụnye, mgbe ụfọdụ a na-akpọkwa coupler, bụ obere ngwaọrụ emebere iji kwụsị ma ọ bụ jikọta eriri fiber optic ma ọ bụ njikọ eriri fiber optic n'etiti ahịrị eriri abụọ. Ọ nwere aka njikọ njikọ nke jikọtara ferrules abụọ ọnụ. Site na ijikọ njikọ abụọ nke ọma, ihe nkwụnye fiber optic na-enye ohere ka ebufe isi iyi ọkụ n'ogo kachasị ma belata mfu dị ka o kwere mee. N'otu oge ahụ, ihe nkwụnye eriri fiber optic nwere uru nke nkwụsị ntinye dị ala, mgbanwe dị mma na mgbanwe. Ha na-eji jikọọ ngwa anya eriri njikọ dị ka FC, SC, LC, ST, MU, MTR.J, D4, DIN, MPO, wdg. Ha na-ọtụtụ ebe na-eji ngwa anya eriri nkwurịta okwu akụrụngwa, atụ ngwa, na na. Ọrụ ahụ kwụsiri ike na ntụkwasị obi.
-
Igbe OYI-FTB-10A
A na-eji akụrụngwa dị ka ebe nkwụsị maka eriri feeder iji jikọọdobe eririna sistemụ netwọkụ nkwukọrịta FTTx. Enwere ike ịme eriri eriri, nkewa, nkesa na igbe a, ma ka ọ dị ugbu a ọ na-enye nchebe siri ike na njikwa makaỤlọ ọrụ netwọk FTTx.
Ọ bụrụ na ị na-achọ ngwọta eriri eriri fiber optic dị elu nke a pụrụ ịdabere na ya, elela anya karịa OYI. Kpọtụrụ anyị ugbu a ka anyị hụ ka anyị nwere ike isi nyere gị aka ịnọnyere gị wee buru azụmahịa gị n'ọkwa ọzọ.
