0755-23179541
sales@oyii.net
Armored Optic Cable GYFXTS
USB Optic Armored
GYFXTS
Njirimara ngwaahịa
1. Obere nha na ịdị arọ dị arọ, na-arụ ọrụ nkwụsị nke ọma na-ehulata dị mfe ntinye.
2. Ike dị elu na-adịghị mma tube na-arụ ọrụ dị mma nke hydrolysis na-eguzogide ọgwụ, ihe mkpuchi tube pụrụ iche na-eme ka nchebe dị oke egwu nke eriri.
3. Full ngalaba jupụtara, USB isi ọbọp longitudinally na corrugated ígwè plastic teepu eme ka mmiri-àmà.
4. USB isi ọbọp longitudinally na corrugated ígwè plastic teepu eme n'azọpịa-eguzogide.
5. Nhọrọ niile na-egbochi mmiri na-egbochi mmiri, na-enye ọrụ dị mma nke mmiri na-ekpuchi mmiri na mgbochi mmiri.
6. Pụrụ iche na-ejuputa gel jupụtara rụrụ tubes na-enye zuru okèngwa anya eririnchebe.
7. Mkpebi siri ike na njikwa akụrụngwa na-eme ka ndụ dịrị ndụ karịa afọ 30.
Nkọwapụta
Emebere eriri ndị ahụ maka dijitalụ ma ọ bụ analọgụnzikọrịta ozina usoro nzikọrịta ozi ime obodo. Ngwaahịa ndị dị mma maka ntinye ikuku, ntinye ọwara ma ọ bụ lie ya ozugbo.
| NGWA | Nkọwa | ||
| Ọnụọgụ eriri | 2 ~ 16F | 24F | |
|
tube rụrụ arụ | OD (mm): | 2.0 ± 0.1 | 2.5± 0.1 |
| Ihe: | PBT | ||
| Ejiri ngwa agha | Corrugation Steel teepu | ||
|
Sheath | Ọkpụrụkpụ: | Mba. 1.5 ± 0.2 mm | |
| Ihe: | PE | ||
| OD nke eriri (mm) | 6.8 ± 0,4 | 7.2 ± 0,4 | |
| Ọnụ ụgbụ (kg/km) | 70 | 75 | |
Nkọwapụta
Nchọpụta FIBER
| Mba. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| Agba agba |
Acha anụnụ anụnụ |
oroma |
Akwụkwọ ndụ akwụkwọ ndụ |
Agba aja aja |
Slate |
Ọcha |
Uhie |
Nwa |
Odo |
Violet |
Pink |
Aqua |
| Mba. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| Ụcha eriri
Mba.
Ụcha eriri |
Acha anụnụ anụnụ |
oroma |
Akwụkwọ ndụ akwụkwọ ndụ |
Agba aja aja |
Slate | Ọcha/ eke |
Uhie |
Nwa |
Odo |
Violet |
Pink |
Aqua |
|
13. |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 | |
| Acha anụnụ anụnụ + Isi ojii | Orange+ ojii isi | Green+ Black isi | Agba aja aja+ isi | Enweghị Slate+B isi | Ọcha + ojii isi | Uhie + ojii isi | Oji+ ọcha isi | Odo+ ojii isi | Violet + ojii isi | Pink + ojii isi | Aqua + Black isi |
FIBER OPTICAL
1. Single Mode Fiber
| NGWA | UNITS | Nkọwapụta |
| Ụdị eriri |
| G652D |
| Attenuation | dB/km | 1310 nm≤ 0.36 1550 nm≤ 0.22 |
|
Mgbasa chromatic |
ps/nm.km | 1310 nm≤ 3.5 1550 nm≤ 18 1625 nm≤ 22 |
| Mkpọsa mgbasa ozi efu | ps/nm2.km | ≤ 0.092 |
| Ogologo ogologo mgbasa ozi efu | nm | 1300 ~ 1324 |
| Ogologo ogologo oge ebipụ (lcc) | nm | ≤ 1260 |
| Attenuation vs. Bending (60mm x100 ntụgharị) |
dB | (radius 30 mm, 100 mgbanaka )≤ 0.1 @ 1625 nm |
| Dayameta Ubi Ụdị | mm | 9.2 ± 0.4 na 1310 nm |
| Isi-Clad Concentricity | mm | ≤0.5 |
| Dayameta mkpuchi | mm | 125 ± 1 |
| Mkpuchi na-abụghị okirikiri | % | ≤0.8 |
| Ogologo mkpuchi mkpuchi | mm | 245 ± 5 |
| Nnwale akaebe | Gpa | 0.69 |
2.Multi Mode Fiber
| NGWA | UNITS | Nkọwapụta | |||||||
| 62.5/125 | 50/125 | OM3-150 | OM3-300 | OM4-550 | |||||
| Dayameta fiber isi | μm | 62.5 ± 2.5 | 50.0 ± 2.5 | 50.0 ± 2.5 | |||||
| Fiber isi na-abụghị okirikiri | % | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | |||||
| Dayameta mkpuchi | μm | 125.0 ± 1.0 | 125.0 ± 1.0 | 125.0 ± 1.0 | |||||
| Mkpuchi na-abụghị okirikiri | % | ≤ 2.0 | ≤2.0 | ≤ 2.0 | |||||
| Ogologo mkpuchi mkpuchi | μm | 245 ± 10 | 245 ± 10 | 245 ± 10 | |||||
| Ihe mkpuchi mkpuchi mkpuchi | μm | ≤ 12.0 | ≤ 12.0 | ≤12.0 | |||||
| Mkpuchi Na-abụghị okirikiri | % | ≤ 8.0 | ≤ 8.0 | ≤ 8.0 | |||||
| Isi-Clad Concentricity | μm | ≤1.5 | ≤1.5 | ≤1.5 | |||||
|
Attenuation | 850nm | dB/km | 3.0 | 3.0 | 3.0 | ||||
| 1300nm | dB/km | 1.5 | 1.5 | 1.5 | |||||
|
OFL |
850nm | MHz ﹒ km |
≥ 160 |
≥ 200 |
≥ 700 |
≥ 1500 |
3500 | ||
|
1300nm | MHz ﹒ km |
≥ 300 |
≥ 400 |
≥ 500 |
≥ 500 |
≥ 500 | |||
| Kasị ukwuu tiori onuogugu | / | 0,275 ± 0,015 | 0,200 ± 0,015 | 0,200 ± 0,015 | |||||
Ịrụ ọrụ igwe na gburugburu ebe obibi nke USB
| Mba. | NGWA | UZỌ anwale | AKWỤKWỌ NDỊ anabatara |
|
1 |
Nnwale nbido tensile | #Ụzọ ule: IEC 60794-1-E1 -. Ibu ogologo ogologo: 500 N -. Ibu dị mkpụmkpụ: 1000 N -. Ogologo eriri USB: ≥ 50 m | -. Mmụba mmụgharị @1550 nm: ≤ 0.1 dB -. Enweghị mgbawa jaket na mgbaji eriri |
|
2 |
Nnwale Nguzogide Crush | #Ụzọ ule: IEC 60794-1-E3 -. Ogologo ibu: 1000 N/100mm -.Obere ibu: 2000 N / 100mm Oge ibu: 1 nkeji | -. Mmụba mmụgharị @1550 nm: ≤ 0.1 dB -. Enweghị mgbawa jaket na mgbaji eriri |
|
3 |
Nnwale Nguzogide Mmetụta | #Ụzọ ule: IEC 60794-1-E4 -. Mmetụta dị elu: 1 m -. Mmetụta dị arọ: 450 g -.Ihe mmetụta: ≥ 5 -.Mmetụta ugboro: ≥ 3/point | -. Mmụba mmụgharị @1550 nm: ≤ 0.1 dB -. Enweghị mgbawa jaket na mgbaji eriri |
|
4 |
Na-ehulata ugboro ugboro | #Ụzọ ule: IEC 60794-1-E6 -.Mandrel dayameta: 20 D (D = dayameta eriri) -. Ibu isiokwu: 15kg -. ugboro ugboro: 30 ugboro -. ịgbagọ ọsọ: 2 s / oge |
-. Mmụba mmụgharị @1550 nm: ≤ 0.1 dB -. Enweghị mgbawa jaket na mgbaji eriri |
|
5 |
Ule Torsion | #Ụzọ ule: IEC 60794-1-E7 -. Ogologo: 1 m -. Ibu isiokwu: 25kg -.Akụkụ: ± 180 degrees -. Ugboro: ≥ 10/point | -. Mmụba ntule @ 1550 nm: ≤0.1dB -. Enweghị mgbawa jaket na mgbaji eriri |
|
6 |
Ule ntinye mmiri | #Ụzọ nnwale: IEC 60794-1-F5B -. Elu nrụgide isi: 1 m -. Ogologo ihe nlere: 3 m -.Nnwale oge: 24 awa |
-. Enweghị mgbapu site na njedebe eriri USB mepere emepe |
|
7 |
Nnwale ịnya igwe okpomọkụ | #Ụzọ nnwale: IEC 60794-1-F1 -. Ọnọdụ okpomọkụ: + 20 ℃, - 40℃, 70℃, 20℃ -.Nleba oge: 24 awa / nzọụkwụ -. Ndekọ okirikiri: 2 | -. Mmụba mmụgharị @1550 nm: ≤ 0.1 dB -. Enweghị mgbawa jaket na mgbaji eriri |
|
8 |
Wepụ arụmọrụ | #Ụzọ ule: IEC 60794-1-E14 -. Ogologo ule: 30 cm -.Okpomọkụ nso: 70 ± 2℃ -.Nleba oge: 24 awa |
-. Enweghị ogige ndochi dapụ |
|
9 |
Okpomọkụ | Na-arụ ọrụ: -40℃~+70℃ Ụlọ ahịa/Nbufe: -40℃~+70℃ Nwụnye: -20℃~+60℃ | |
FIBER OPTIC CABLE BENDING RADIUS
Nkwekọrịta kwụ ọtọ: ≥ ugboro 10 karịa dayameta nke eriri USB
Mgbagwoju anya dị egwu: ≥ 20 ugboro karịa dayameta nke eriri USB.
Ngwugwu na akara
1.Ngwugwu
A naghị ekwe ka eriri eriri abụọ dị ogologo n'ime otu drum, a ga-emechi nsọtụ abụọ, a ga-akwakọba ọnụ abụọ n'ime drum, debe ogologo eriri USB na-erughị mita 3.
2. Mark
Cable Mark: Ụdị, Ụdị USB, Ụdị eriri na ọnụ ọgụgụ, Afọ mmepụta, Ogologo akara.
AKWỤKWỌ Nnwale
Akuko ule na asambodo ga-abụwetara na ina.
-
Igbe Desktọpụ OYI-ATB02B
OYI-ATB02B igbe ọdụ ụgbọ mmiri abụọ bụ nke ụlọ ọrụ n'onwe ya mepụtara ma mepụta ya. Arụmọrụ nke ngwaahịa na-emezu ihe achọrọ nke ụkpụrụ ụlọ ọrụ YD/T2150-2010. Ọ dabara adaba maka ịwụnye ụdị modulu dị iche iche ma nwee ike itinye ya n'ọrụ mpaghara wiring subsystem iji nweta eriri eriri dual-core na mmepụta ọdụ ụgbọ mmiri. Ọ na-enye ndozi eriri, ịpụpụ, splicing, na ngwaọrụ nchebe, ma na-enye ohere maka obere ọnụọgụ nke eriri anaghị arụ ọrụ, na-eme ka ọ dabara maka ngwa sistemụ FTTD (fiber na desktọpụ). Ọ na-eji etiti elu agbakwunyere, ọ dị mfe ịwụnye na ịkwasa ya, ọ nwere ọnụ ụzọ nchebe yana uzuzu n'efu. A na-eji plastik ABS dị elu mee igbe ahụ site na ịkpụzi injection, na-eme ka ọ bụrụ ihe mgbochi, ọkụ na-egbochi ọkụ, na-eguzogide mmetụta dị ukwuu. Ọ nwere ihe mkpuchi dị mma na mgbochi ịka nká, na-echebe eriri USB ma na-eje ozi dị ka ihuenyo. Enwere ike itinye ya na mgbidi.
-
Akụrụngwa eriri Fiber Optic maka Fixati...
Ọ bụ ụdị mgbodo okporo osisi ejiri ígwè carbon dị elu mee. A na-emepụta ya site na iji stampụ na-aga n'ihu ma na-akpụ akpụ, na-ebute stampụ ziri ezi na ọdịdị edo. A na-eji eriri igwe anaghị agba nchara nke na-eme ka ogwe osisi ahụ bụrụ nke a na-emepụta site na stamping, na-eme ka ọ dị mma na ịdịte aka. Ọ na-eguzogide nchara, ịka nká, na corrosion, na-eme ka ọ dị mma maka iji ogologo oge mee ihe. Ihe nkwado ogwe dị mfe ịwụnye ma rụọ ọrụ na-enweghị mkpa maka ngwaọrụ ndị ọzọ. Ọ nwere ọtụtụ ojiji na enwere ike iji ya n'ebe dị iche iche. Enwere ike iji eriri nchara mechie ihe mkpuchi hoop n'osisi ahụ, enwere ike iji ngwaọrụ ahụ jikọọ ma dozie akụkụ nhazi S-ụdị na ogwe osisi ahụ. Ọ dị obere ma nwee nhazi kọmpat, ma ọ siri ike ma na-adịgide adịgide.
-
Igbe OYI-FAT08
Igbe ọnụ anya 8-isi OYI-FAT08A na-arụ ọrụ kwekọrọ n'ụkpụrụ ụlọ ọrụ YD/T2150-2010 chọrọ. A na-eji ya eme ihe na njikọ ọnụ ụzọ ịnweta FTTX. A na-eme igbe ahụ nke PC dị elu, ABS plastic alloy injection molding, nke na-enye ezigbo akara na iguzogide ịka nká. Tụkwasị na nke ahụ, enwere ike kpọgidere ya na mgbidi n'èzí ma ọ bụ n'ime ụlọ maka ntinye na iji.
-
Ear-Lokt igwe anaghị agba nchara
A na-emepụta buckles igwe anaghị agba nchara site na ụdị 200 dị elu, ụdị 202, ụdị 304, ma ọ bụ ụdị 316 igwe anaghị agba nchara iji kwekọọ na eriri igwe anaghị agba nchara. A na-ejikarị eriri eme ihe maka mmachi dị arọ ma ọ bụ eriri. OYI nwere ike tinye akara ma ọ bụ akara ndị ahịa n'ime eriri.
Akụkụ bụ isi nke eriri igwe anaghị agba nchara bụ ike ya. Njirimara a bụ n'ihi otu ntinye igwe anaghị agba nchara, nke na-enye ohere maka iwu na-enweghị njikọ ma ọ bụ ọnụ. Akpụkpọ ahụ dị na nha 1/4 ″, 3/8″, 1/2″, 5/8″, na 3/4″ obosara yana, ewezuga 1/2″ buckles, nabata ihe mkpuchi okpukpu abụọ. ngwa iji dozie mkpa njigide ọrụ dị arọ karị.
-
Igbe Desktọpụ OYI-ATB02C
OYI-ATB02C otu ọdụ ụgbọ mmiri na-emepụta ma na-emepụta site n'onwe ya. Arụmọrụ nke ngwaahịa na-emezu ihe achọrọ nke ụkpụrụ ụlọ ọrụ YD/T2150-2010. Ọ dabara adaba maka ịwụnye ụdị modulu dị iche iche ma nwee ike itinye ya n'ọrụ mpaghara wiring subsystem iji nweta eriri eriri dual-core na mmepụta ọdụ ụgbọ mmiri. Ọ na-enye ndozi eriri, ịpụpụ, splicing, na ngwaọrụ nchebe, ma na-enye ohere maka obere ọnụọgụ nke eriri anaghị arụ ọrụ, na-eme ka ọ dabara maka ngwa sistemụ FTTD (fiber na desktọpụ). A na-eji plastik ABS dị elu mee igbe ahụ site na ịkpụzi injection, na-eme ka ọ bụrụ ihe mgbochi, ọkụ na-egbochi ọkụ, na-eguzogide mmetụta dị ukwuu. Ọ nwere ihe mkpuchi dị mma na mgbochi ịka nká, na-echebe eriri USB ma na-eje ozi dị ka ihuenyo. Enwere ike itinye ya na mgbidi.
-
OYI-F235-16 Core
A na-eji igbe a dị ka ebe nkwụsị maka eriri feeder iji jikọọ na eriri dobe banyeSistemụ netwọkụ nkwukọrịta FTTX.
Ọ intergtates eriri splicing, kewaa, nkesa, nchekwa na USB njikọ na otu unit. Ka ọ dị ugbu a, ọ na-enye nchebe siri ike na njikwa maka ndịỤlọ ọrụ netwọk FTTX.
Ọ bụrụ na ị na-achọ ngwọta eriri eriri fiber optic dị elu nke a pụrụ ịdabere na ya, elela anya karịa OYI. Kpọtụrụ anyị ugbu a ka anyị hụ ka anyị nwere ike isi nyere gị aka ịnọnyere gị wee buru azụmahịa gị n'ọkwa ọzọ.