OYI-ODF-MPO RS288

High Density Fiber Optic Patch Panel

OYI-ODF-MPO RS288

OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.

Product Detail

FAQ

Product Tags

Product Features

1.Standard 1U height, 19-inch rack mounted, suitable for cabinet, rack installation.

2.Made by high strength cold roll steel.

3.Electrostatic power spraying can pass 48 hours salt spray test.

4.Mounting hanger can be adjusted forward and backward.

5.With sliding rails, smooth sliding design, convenient for operating.

6.With cable management plate at rear side, reliable for optical cable management.

7.Light weight, strong strength, good anti-shocking and dustproof.

Applications

1. Data communications networks.

2. Storage area network.

3. Fiber channel.

4. FTTx system wide area network.

5. Test instruments.

6. CATV networks.

7. Widely used in FTTH access network.

Drawings (mm)

Instruction

1.MPO/MTP patch cord

2. Cable fixing hole and cable tie

3. MPO adapter

4. MPO cassette OYI-HD-08

5. LC or SC adapter

6. LC or SC patch cord

Accessories

Item	Name	Specification	Qty
1	Mounting hanger	6719.587.6mm	2pcs
2	Countersunk head screw	M3*6/metal/Black zinc	12pcs
3	Nylon cable tie	3mm*120mm/white	12pcs

Packaging Information

Carton	Size	Net weight	Gross weight	Packing qty	Remark
Inner carton	48x41x12.5cm	5.6kgs	6.2kgs	1pc	Inner carton 0.6kgs
Master carton	50x43x41cm	18.6kgs	20.1kgs	3pcs	Master carton 1.5kgs

Note: Above weight is not included the MPO cassette OYI HD-08. Each OYI HD-08 is 0.0542kgs.

Inner Box

Outer Carton

Patch Cords

optical terminal box

FTTX access system

pigtails

Products Recommended

Dead end Guy Grip

Dead-end preformed is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines. The reliability and economic performance of the product are better than the bolt type and hydraulic type tension clamp that are widely used in the current circuit. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. It can be made of galvanized steel or aluminum clad steel.

VIEW MORE
OYI 3436G4R

ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON REALTEK chipset and has high reliability, easy management, flexible configuration，robustness,good quality service guarantee(Qos). This ONU supports IEEE802.11b/g/n/ac/ax, called WIFI6, concurrently, a WEB system provided simplifi es the configuration of the WIFI and connects to INTERNET conveniently for users. The ONU supports one pots for VOIP application.

VIEW MORE
OYI FAT H24A

This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building.

VIEW MORE
OYI-ODF-SR2-Series Type

OYI-ODF-SR2-Series Type optical fiber cable terminal panel is used for cable terminal connection, can be used as a distribution box. 19″ standard structure; Rack installation; Drawer structure design, with front cable management plate, Flexible pulling, Convenient to operate; Suitable for SC, LC ,ST, FC,E2000 adapters, etc. Rack mounted Optical Cable Terminal Box is the device that terminates between the optical cables and the optical communication equipments, with the function of splicing, termination, storing and patching of optical cables. SR-series sliding rail enclosure, easy access to fiber management and splicing. Aversatile solution in multiple sizes (1U/2U/3U/4U) and styles for building backbones, data centers and enterprise applications.

VIEW MORE
Optical Fiber Cable Storage Bracket

The Fiber Cable storage bracket is useful. Its main material is carbon steel. The surface is treated with hot-dipped galvanization, which allows it to be used outdoors for more than 5 years without rusting or experiencing any surface changes.

VIEW MORE
OYI-FAT H08C

This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building.

VIEW MORE

If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

INQUIRE