0755-23179541 
sales@oyii.net
Duplex Patch Cord
Optic Fiber Patch Cord
Duplex Patch Cord
Product Features
Low insertion loss.
High return loss.
Excellent Repeatability, exchangeability, wearability and stability.
Constructed from high quality connectors and standard fibers.
Applicable connector: FC, SC, ST, LC, MTRJ and etc.
Cable material: PVC, LSZH, OFNR, OFNP.
Single mode or multiple mode available, OS1, OM1, OM2, OM3, OM4 or OM5.
Cable size: 2.0mm, 3.0mm, 4.0mm, 5.0mm.
Environmentally Stable.
Technical Specifications
| Parameter | FC/SC/LC/ST | MU/MTRJ | E2000 | ||||
| SM | MM | SM | MM | SM | |||
| UPC | APC | UPC | UPC | UPC | UPC | APC | |
| Operating Wavelength (nm) | 1310/1550 | 850/1300 | 1310/1550 | 850/1300 | 1310/1550 | ||
| Insertion Loss (dB) | ≤0.2 | ≤0.3 | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.3 |
| Return Loss (dB) | ≥50 | ≥60 | ≥35 | ≥50 | ≥35 | ≥50 | ≥60 |
| Repeatability Loss (dB) | ≤0.1 | ||||||
| Interchangeability Loss (dB) | ≤0.2 | ||||||
| Repeat Plug-pull Times | ≥1000 | ||||||
| Tensile Strength (N) | ≥100 | ||||||
| Durability Loss (dB) | ≤0.2 | ||||||
| Operating Temperature (℃) | -45~+75 | ||||||
| Storage Temperature (℃) | -45~+85 | ||||||
Applications
Telecommunication system.
Optical communication networks.
CATV, FTTH, LAN.
NOTE: We can provide specify patch cord which required by customer.
Fiber optic sensors.
Optical transmission system.
Test equipment.
Packaging Information
SC/APC-SC/APC SM Duplex 1M as a reference.
1 pc in 1 plastic bag.
400 specific patch cord in carton box.
Outer carton box size: 46*46*28.5 cm, weight: 18.5kg.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Anchoring Clamp PA2000
The anchoring cable clamp is of high quality and durable. This product consists of two parts: a stainless steel wire and its main material, a reinforced nylon body that is lightweight and convenient to carry outdoors. The clamp’s body material is UV plastic, which is friendly and safe and can be used in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 11-15mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees Celsius. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
-
Self-supporting Figure 8 Fiber Optic Cable
The 250um fibers are positioned in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. The tubes (and fibers) are stranded around the strength member into a compact and circular cable core. After an Aluminum (or steel tape) Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of the cable, accompanied by the stranded wires as the supporting part, is completed with a polyethylene (PE) sheath to form a figure 8 structure. Figure 8 cables, GYTC8A and GYTC8S, are also available upon request. This type of cable is specifically designed for self-supporting aerial installation.
-
OYI-FOSC-H07
The OYI-FOSC-02H horizontal fiber optic splice closure has two connection options: direct connection and splitting connection. It is applicable in situations such as overhead, man-well of pipeline, and embedded situations, among others. Comparing with a terminal box, the closure requires much stricter sealing requirements. Optical splice closures are used to distribute, splice, and store outdoor optical cables that enter and exit from the ends of the closure.
The closure has 2 entrance ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
Female Attenuator
OYI FC male-female attenuator plug type fixed attenuator family offers high performance of various fixed attenuation for industrial standard connections. It has a wide attenuation range, extremely low return loss, is polarization insensitive, and has excellent repeatability. With our highly integrated design and manufacturing capability, the attenuation of male-female type SC attenuator can also be customized to help our customers find better opportunities. Our attenuator complies with industry green initiatives, such as ROHS.
-
OYI A Type Fast Connector
Our fiber optic fast connector, the OYI A type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation, and the structure of the crimping position is a unique design.
-
Zipcord Interconnect Cable GJFJ8V
ZCC Zipcord Interconnect Cable uses 900um or 600um flame-retardant tight buffer fiber as an optical communication medium. The tight buffer fiber is wrapped with a layer of aramid yarn as strength member units, and the cable is completed with a figure 8 PVC, OFNP, or LSZH (Low Smoke, Zero Halogen, Flame-retardant) jacket.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.